Chain drag conveyor UHMW UHMWPE scraper with high wear resistance

Advantages of UHMWPEUHMWPE is odourless, tasteless, and nontoxicHas extremely low moisture absorptionVery low coefficient of frictionSelf-lubricating and is highly resistant to abrasionVery resistant to water, moisture, most chemicalsResistant to UV radiation, and micro-organismsUHMWPE only becomes brittle at temperatures below

Featured Products

Advantages of UHMWPE

  • UHMWPE is odourless, tasteless, and nontoxic
  • Has extremely low moisture absorption
  • Very low coefficient of friction
  • Self-lubricating and is highly resistant to abrasion
  • Very resistant to water, moisture, most chemicals
  • Resistant to UV radiation, and micro-organisms
  • UHMWPE only becomes brittle at temperatures below −150 °C.

Disadvantages of UHMWPE

  • Its melting point is around 130 to 136 °C
  • Not advisable to use UHMWPE at temperatures exceeding 80 to 100 °C for extended periods of time
  • UHMWPE will deform continually as long as the stress is present, an effect known as creep
  • Maybe not suitable for high load applications.

How does UHMWPE perform?

  • UHMWPE has an incredible resistance to abrasion and can outperform almost any engineering plastic in this regard
  • It has a very low friction co-efficient and provides a bearing medium that is very free running and exceptionally long lasting
  • It is resistant to many dilute acids, solvents and cleaning agents
  • It has a max operating temperature of plus 90°C and a short term operating temperature of plus 120°C
  • A very tough material, with the highest impact strength of any thermoplastic presently made.

What is UHMWPE used for?

Because UHMWPE has excellent abrasion resistance it is often used for sand, gravel or aggregate process applications. These environments are incredibly harsh on any bearing material but UHMWPE is one of the few engineering plastics capable of withstanding such punishing abuse.

UHMWPE can also be used for low friction pulleys because of its very low co-efficient provides a bearing medium that is very free running and exceptionally long lasting. It is often found in food production environments where high volumes of containers need to be guided along conveyors or production lines.

Because it has very low moisture absorption, it is also found in some high demand areas of marine applications. It's sometimes used in some cryogenic components due to its low operating temperature abilities. Because of its resistance to wear and impact, UHMWPE continues to find increasing industrial applications, including the automotive and bottling sectors. Since the 1960s, it has also been the most commonly used material for total joint arthroplasty in orthopaedic and spine implants.

What are the machining characteristics of UHMWPE ?
High speed steel tooling is recommended with lots of back rake, side rake and clearances, and a generous nose radius. Use caution when turning UHMWPE as the chips will be continuous and tend to wrap around the tooling so a "pecking action" is advised.

Gluing and bonding
UHMWPE does not absorb water readily, nor wet easily, which makes bonding it to other polymers difficult.

Is UHMWPE good for food applications?
Natural grade UHMWPE is FDA approved to be used in food applications.

Does UHMWPE have good Wear resistance?
UHMWPE is highly resistant to abrasion, in some forms being 15 times more resistant to abrasion than carbon steel.

Chemical resistance
It is highly resistant to corrosive chemicals except oxidizing acids

Unique characteristics
Its coefficient of friction is significantly lower than that of nylon and acetal, and is comparable to that of PTFE, or Teflon. Skin does not interact with it strongly, making the surface feel slippery, almost waxy.

Why should you choose UHMWPE?
This engineering plastic has an exceptionally low coefficient of friction which offers superb sliding properties and is one of the best materials for wear and abrasion resistance. It is tough even at low temperatures, it offers low weight, and is easy to weld.

Summary
This engineering plastic can be machined into virtually anything, from small (low load)gears and bearings to huge sprockets-shapes that until recently were only possible with metals. It not only outperforms metal in abrasion applications, it's also easier to machine and therefore cheaper. This versatile plastic can be milled, planed, sawed, drilled, and turned to create a huge variety of parts at a very competitive price.  It possesses outstanding abrasion resistance, superior impact resistance, non-sticking and self-lubricating and excellent mechanical properties, even in cryogenic conditions.

Detailed Photos
Chain Drag Conveyor UHMW UHMWPE Scraper Blade with High Wear Resistant
Chain Drag Conveyor UHMW UHMWPE Scraper Blade with High Wear Resistant
Chain Drag Conveyor UHMW UHMWPE Scraper Blade with High Wear Resistant
Chain Drag Conveyor UHMW UHMWPE Scraper Blade with High Wear Resistant

 

Certifications

Chain Drag Conveyor UHMW UHMWPE Scraper Blade with High Wear Resistant

Packaging & Shipping
Chain Drag Conveyor UHMW UHMWPE Scraper Blade with High Wear Resistant
Chain Drag Conveyor UHMW UHMWPE Scraper Blade with High Wear Resistant

 

Company Profile



Chain Drag Conveyor UHMW UHMWPE Scraper Blade with High Wear Resistant

Our Advantages

1.We are the direct manufacture for HDPE and UHMWPE sheet. 

Chain Drag Conveyor UHMW UHMWPE Scraper Blade with High Wear Resistant
Chain Drag Conveyor UHMW UHMWPE Scraper Blade with High Wear Resistant
Chain Drag Conveyor UHMW UHMWPE Scraper Blade with High Wear Resistant
Chain Drag Conveyor UHMW UHMWPE Scraper Blade with High Wear Resistant

 

FAQ

Q: Are you trading company or manufacturer ?

A: We are factory.

Q: How long is your delivery time?

A: Generally it is 5-10 days if the goods are in stock. or it is 15-20 days if the goods are not in stock, it is according to
quantity.

Q: Do you provide samples ? is it free or extra ?

A: Yes, we could offer the sample for free charge but do not pay the cost of freight.


Q: What is your terms of payment ?

A: Payment<=1000USD, 100% in advance. Payment>=1000USD, 30% T/T in advance ,balance before shippment.
If you have another question, pls feel free to contact us as below:


 




 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours