Conveyor Pulleys

The pulley directly was made by large seamless steel. We precisely cut the tube by using the flame cutting machine, and weld the inner pulley disc by using the professional pulley welding machine, and weld the pulley sleeve & disc by using the positioner. We use the large drum lathe process the outside circle, so that it ensures the pulley has the uniform thickness and small pulsation. We chose 45# round steel & sleeve and process the whole shaft so that it ensures shaft concentricity and reduction for the eccentric shaft force. It make sure the pulley move more stable, high quality bearing which is hot charging and bearing block are equipped inner bearing enlargement device, so the bearing can be easily pushed to the bearing position and it avoids the bearing damage from the beating. We need make the eliminating inner stress treatments when the pulley's withstand forces exceed 80KN and we will make the static balance inspection when the belt speed exceeds 2.5m/s.

1. Brief Introduction

A conveyor will always consist of at least two pulleys, head pulley and tail pulley, with additional pulleys used depending on the configuration. Standard-duty pulleys are usually adequate for simple applications, but mine-duty and engineered pulleys are also available where heavy-duty pulleys are required.

Conveyor pulleys are divided into the following sub-categories.

Head Pulleys

The head pulley is located at the discharge point of the conveyor. It usually drives the conveyor and often has a larger diameter than other pulleys. For better traction, the head pulley is usually lagged (with either rubber or ceramic lagging material).

Tail and Wing Pulleys

The tail pulley is located at the loading end of the belt. It comes with either a flat face or a slatted profile (wing pulley), which cleans the belt by allowing material to fall between the support members.

Snub Pulleys

Pulley, which is provided to increase/decrease, warp/contact angle of belt on nearby pulley, is called Snub Pulley.

Drive Pulleys

Drive pulleys, which can also be the head pulley, are driven by a motor and power transmission unit to propel the belt and material to the discharge.

Bend Pulleys

A bend pulley is used for changing the direction of the belt.

The Bend Pulley is usually installed at the tail part or the vertical take-up equipment part when the belt direction need to 180°bending. It will be installed above the take-up equipment part while 90°bending.

The surface treatment of the bend pulley can be smooth steel and flat rubber lagging.

Take-up Pulley

A take-up pulley is used to provide the belt with the proper amount of tension. Its position is adjustable.

2. Features

• It mainly consists of shaft, shell, bearing, housing, hub and pulley lagging.
• TD75 and DTII standard pulley available
• Classified into light duty,medium duty and heavy duty according to different carrying capacity
• Surface treatment:bare steel surface and plain rubber surface
• Oil or grease lubricated.
• Smooth & accurate shaft radii
• Welded connections designed to minimise stress
• Shafts designed for infinite fatigue life
• Low friction coefficient
• Multi-labyrinth seals achieve waterproof and dust proof.
• Adopt good bearing make sure the long lifetime
• Easy to install
• Durability
• Seamless finish

3. Product Details

4. Conveyor Pulleys Under Manufacturing


5. Other Conveyor Pulleys for Options







6. Company Details








5.FAQ
Q&A
Q:How to install the impact bar?
A:We have rich experience of installation for 8 years, and could supply guidance for you by video and instruction for installation.

Q:Are you a trading company or manufacturer ?
A:We are a professional manufacturer of impact bar, belt cleaner, and other belt conveyor accessories.

Q:Can I get a sample for testing ?How do it charged ?
A:Yes, sample is available for free.But we don't bear the Express cost.

Q:Do you have foreign experience for impact bar and other belt conveyor accessories ?
A:Yes, we have exported the impact bar, belt cleaner and other belt conveyor accessories to Turkey, Malaysia,Vietnam, India, Indonesia, Pakistani, UAE, Jordan, Egypt, Congo, Argentina, Algeria, Uganda, Cameroon, the Philippines, Kenya, Nigeria, Russia, Iran, South Africa, etc.

Q.What is your terms of packing?
A:Generally, we pack our goods in woven bags and cartons, we can also pack the goods as per your request.

Q.What is your terms of payment?
A:T/T 30% as deposit, and 70% before delivery by T/T or L/C at sight.We'll show you the photos of the products and packages before you pay the balance.

Q.What is your terms of delivery?
A:EXW, FOB, CFR, CIF.

Q.How about your delivery time?
A:Generally, it will take 15 to 45 days after receiving your advance payment.The specific delivery time depends on the items and the quantity of your order.

Q.Can you produce according to the samples?
A:Yes, we can produce by your samples or technical drawings.We can build the molds and fixtures.

Q.What is your sample policy?
A:We can supply the sample if we have ready parts in stock, but the customers have to pay the sample cost and the courier cost.

Q.Do you test all your goods before delivery?
A:Yes, we have 100% test before delivery.

Q:How do you make our business long-term and good relationship?
A:1.We keep good quality and competitive price to ensure our customers benefit ;
2.We could assign long-term cooperation agreements and agency agreements with our customers.We are looking for business partners and agents worldwide.We offer great policy to our agents and partners.Welcome to join BuMtresD!
3.We respect every customer as our friend and we sincerely do business and make friends with them, no matter where they come from